Thin film materials

Mitsui TPX film

更新时间:2015-09-24 17:27:41点击次数:2425次
相关介绍
Mitsui TPX film
The overview
Mitsui TPX from type membrane can be used for various uses high performance release film, the superior de film and heat resistance as a flexible printed circuit board (FPC) based circuit board and advanced materials such. Release film for various occasions, with single-layer and multilayer type products, can be selected according to the application.
The characteristics of:
1: heat resistance can also be used in the high temperature of 200 DEG C under the condition that the melting point of 230 degrees Celsius in the TPX
Degrees, can also be used in the process of 200 degrees Celsius in the;
The 2 release of various materials can be stripped, low surface tension, excellent releasability of epoxy resin and other materials;
3. Liner: with complex surface shape anastomosis, Mitsui TPX can be softening at about 40 DEG C under the condition, is extremely easy to close attachment to the complex shape of concave and convex.
4 low pollution: do not contain silicone and plasticizer;
5 environmental adaptability: incineration;
The scope of application
1 can be used for flexible printed circuit board, circuit board hard bending.
2 can be used for AMC (tip with material), is a kind of mechanical strength and heat resistance of the composite
Mitsui materials, TPX can be used in AMC manufacturing process, can be used as fiber cloth, carbon fiber and ring etc.
The use of oxygen release film resin curing process.
3 can be used for sealing semiconductor: with the development of IT technology, now there are many semiconductor continued
The advent of Mitsui TPX can also be sealed by the thermosetting resin, the curing time as a release film for.
4. In the development of cutting-edge technology responsible for an important role of Mitsui TPX used in manufacturing display element materials, solar cell materials, high performance rubber sheet headlining cutting-edge technology components and materials, can do for removing films or membrane separation etc. all industry fields of both release and heat resistance of the film.
The performance data:
1 single - Single-layer Type
TYPE
Single-layer Film
Taiwan
Japan
Product Name
X-44BR
X-99BR
X-44B
X-88B
X-88BMT4
Thickness
50UM
50UM
25UM
50UM
50UM
100UM
50UM
100UM
Item
Unit
Method
GLOSS
GLOSS
GLOSS
GLOSS
GLOSS
GLOSS
Matt Both side
Matt Both side
Strength at Yield (MD)
MPa
JIS K7127
Twenty-four
Thirty-four
Twenty-six
Twenty-six
Thirty-three
Thirty
Thirty
Twenty-nine
Softening Temp.
C
Tohcello*1
Forty-three
Fifty-five
Forty-three
Forty-three
Fifty-five
Fifty-five
Fifty-five
Fifty-five
Thermal dimensional
Change ratio (MD)
%
Tohcello*1
One point four
-1.0
Two point two
One point seven
One point nine
One point four
-0.5
-0.3
Thermal dimensional
Change ratio (TD)
%
Tohcello*1
-1.0
Zero point three
-1.8
-1.2
-1.4
-1.2
Zero point three
Zero point one
2 tier Multi-layer Type
TYPE
Multi-layer Film
Taiwan
Japan
Product Name
CR2040R
CR1012
CR1012MT4
CR1033
CR2031
CR2031MT4
CR2031MT6
Thickness
120UM
150UM
150UM
150UM
120UM
120UM
120UM
Item
Unit
Surface Method
Gloss
GLOSS
Matt Both side
GLOSS
GLOSS
Matt Both side
Matt Both side
Strength at Yield (MD)
MPa
JIS K7127
Twenty-three
Twenty
Seventeen
Thirteen
Twenty-two
Twenty-one
Twenty
Softening Temp.
C
Tohcello*1
Fifty-two
Forty-three
Forty-three
Thirty-four
Forty-eight
Forty-eight
Forty-eight
Thermal dimensional
Change ratio (MD)
%
Tohcello*1
-0.5
Zero point nine
Zero point four
Zero point eight
Zero point seven
-1.6
-1.6
Thermal dimensional
Change ratio (TD)
%
Tohcello*1
-1.0
-1.2
-0.6
-0.9
-1.0
Zero point four
Zero point four